On notification of firmware update and release, the AIR XS can be updated via the on-device firmware update functionality. The instrument requires the update to take place via the connection of an external USB device loaded with the latest firmware.

Carry out the following steps to update your firmware: 

1)    Insert the USB and wait a few seconds for it to be recognised

2)    Navigate to ‘Main Menu’ > ‘System > ‘Firmware Update’

3)    Follow the onscreen instructions

4)    The unit will update and automatically restart within a few seconds

Contact Trolex support.

Replace HEPA filters.

Open the particle inlet cap.

1. Wipe the outer casing with a damp cloth.
2. Use compressed air to clean the particle inlet.

1. Press and hold the centre button to go to the Main Menu
2. Go to Communication.
3. Configure RS485 baud rate and Ethernet settings.

1. Press and hold the centre button to go to the Main Menu
2. Go to Communication.
3. Configure RS485 baud rate and Ethernet settings.

Yes, via MODBUS RTU (RS485) or MODBUS TCP/IP (Ethernet) for integration with SCADA systems and Aethair’s Thiamis.

Yes, via MODBUS RTU (RS485) or MODBUS TCP/IP (Ethernet) for integration with SCADA systems and Aethair’s Thiamis.

1. Insert a USB device (minimum 8GB, FAT32 format)
2. Press and hold the centre button to go to the Main Menu
3. Navigate to Data Download > USB Download